Instruction manual RiL1795
Please keep this instruction manual for future reference
13
How to use?
- Press the temperature set button until super cooling light comes on.
- Super cooling LED will light during this mode.
- For optimal appliance performance in maximum cooling capacity, set the
appliance to active Super Cooling mode 6 hours before you put the fresh food
into the fridge.
During this mode:
If you press temperature set button, the mode will be cancelled and the setting will
be restored from 2°C.
NOTE:
“Super cooling” mode will be automatically cancelled after 6 hours or when cooling
sensor temperature drops beneath 2 °C.
FRIDGE TEMPERATURE SETTINGS
- The initial temperature of the Setting Display is 5°C.
- Press fridge setting button once.
- Every time you press the button, the setting temperature will increase. (2°C, 4°C,
5°C, 6°C, 8°C, super cooling)
- If you press the fridge setting button until super cooling symbol is displayed and
you do not press any button within the following 3 seconds, Super cooling LED
will blink and then be set.
- If you keep on pressing, it will restart from last value..
RIL1795_Larder Instruction Manual.indd 13 07/02/2017 10:35
To Next Page
Loading...
