What to do if my Caple Ventilation Hood lights and fan do not work?
If the lights and fan on your Caple Ventilation Hood aren't working, there are a couple of things you can check: * **Blown Fuse**: Replace the fuse. * **Loose Power Cord**: Ensure the power cord is securely plugged into the power supply.
Why is my Caple ZEL900GM vibrating so much?
Excessive vibration in your Caple Ventilation Hood can stem from a few potential issues: 1. **Damaged Fan Blade**: Switch off the unit and contact Caple Service to be repaired by qualified service personnel only. 2. **Loose Fan Motor**: Switch off the unit and contact Caple Service to be repaired by qualified service personnel only. 3. **Incorrect Bracket Mounting**: Take down the unit and check whether the bracket is in the correct location.
What to do if the lights and fan on my Caple ZEL900GM Ventilation Hood do not work?
If your Caple Ventilation Hood's lights and fan aren't working, there are a couple of things to check. First, it could be due to a blown fuse, in which case you should replace the fuse. Another possibility is that the power cord is loose. Make sure to plug it into the power supply securely.
How to improve the extraction performance of my Caple ZEL900GM Ventilation Hood?
If your Caple Ventilation Hood's extraction performance isn't up to par, the most common cause is a dirty filter. You should clean the grease filter as described in the ‘Care and maintenance’ section. If your hood is in recirculation mode, replace the charcoal filter.
What to do if the lights are on but the fan doesn't work on my Caple ZEL900GM Ventilation Hood?
If the lights on your Caple Ventilation Hood are working but the fan isn't, it could be that the fan blade is jammed. In this case, switch off the unit and contact Caple Service. This should be repaired by qualified service personnel only.
General| Brand | Caple |
|---|---|
| Model | ZEL900GM |
| Category | Ventilation Hood |
| Language | English |
To Next Page
