What to do if the lights and fan do not work on my Caple Ventilation Hood?
If the lights and fan on your Caple Ventilation Hood aren't working, start by checking the fuse and replacing it if it's blown. Also, ensure the power cord is securely plugged into the power supply.
Why is my Caple ZI922 vibrating so much?
If your Caple Ventilation Hood is vibrating excessively, there could be several reasons. First, the fan blade might be damaged, or the fan motor might not be tightly fixed. In these cases, switch off the unit and contact Caple Service to be repaired by qualified service personnel only. Alternatively, the unit might not be correctly hung on the bracket. In this case, take down the unit and check whether the bracket is in the correct location.
How to improve the extraction performance of my Caple Ventilation Hood?
If your Caple Ventilation Hood isn't extracting air effectively, the filter likely needs attention. Clean the grease filter as described in the ‘Care and maintenance’ section. If your hood is in recirculation mode, replace the charcoal filter.
What to do if the lights are on, but the fan does not work on my Caple Ventilation Hood?
If the lights on your Caple Ventilation Hood are working, but the fan isn't, it could be that the fan blade is jammed or the motor is damaged. In this case, switch off the unit and contact Caple Service. It should be repaired by qualified service personnel only.
General| Brand | Caple |
|---|---|
| Model | ZI922 |
| Category | Ventilation Hood |
| Language | English |
To Next Page
