What to do if my Caravaggi Chipper has a difficult start-up or loss of power?
If your Caravaggi Chipper experiences a difficult start-up or loss of power, examine the belt tension and condition, blocked pulleys, PTO, or gears. You should also check the state of the engine or motor, referring to the supplied instruction manual for guidance.
How to troubleshoot a Caravaggi Chipper that does not start?
If the Caravaggi Chipper does not start, verify the belt tension and condition, check for blocked pulleys, PTO, or gears. Ensure the cutters, blade, and counter-blade are in good condition and that there is no material obstructing the milling chamber. Also, check the condition of the engine or motor, referring to the supplied instruction manual.
Why does my Caravaggi Chipper lose revs and function irregularly?
If the Caravaggi Chipper loses revs and functions irregularly, check the belt tension and condition, look for blocked pulleys, PTO, or gears. Also, inspect the cutters, blade, counter-blade, and ensure the milling chamber is free of obstructions. Clear any blockages from the sieve. Check the engine or motor condition, consulting the supplied instruction manual. Finally, examine the material being chopped at the moment of breakdown.
What to do if the hopper of my Caravaggi Chipper rejects the material?
If the hopper of your Caravaggi Chipper rejects the material, inspect the cutters, blade, and counter-blade, and ensure the milling chamber is clear of obstructions. Check the condition of the engine or motor, referring to the supplied instruction manual. Also, verify the wear state of the hopper rubber protection.
Provides information on the breadth, length, height, weight, and maximum sound power level of the machine.
Instructions for starting up the machine using a petrol engine.
Instructions for starting up the machine using an electric motor.
Instructions for starting up the machine via tractor PTO connection.
Guidance on loading trimming and foliage into the upper loading hopper.
Detailed steps for unscrewing nuts, removing old blades, and fitting new ones.
Procedure for removing and replacing the counter-blade by unscrewing securing screws.
Steps to invert or replace knives and spacers, ensuring proper balancing.
Instructions on removing, inverting, or replacing breaker bars and sieves.
Scheduled checks for engine oil, screws, belts, blades, and cleaning.
Lists specific situations and damages that are excluded from the manufacturer's warranty coverage.
Outlines the steps to follow for submitting a warranty claim for defective parts.
To Next Page
General
