What to do if my Caravaggi CIPPO 25 does not start?
If your Caravaggi Chipper fails to start, you should: * Check the chipper blade for wear. * Ensure there is no material obstructing the shredding chamber. * Refer to the engine or tractor booklet for troubleshooting guidance.
Why does my Caravaggi CIPPO 25 Chipper motor run unevenly or slow down?
If your Caravaggi Chipper motor runs unevenly or slows down, consider the following: * Inspect the chipper blade for wear. * Check the shredding chamber for obstructions. * Review the engine or tractor documentation. * Assess the quality of the shredding material.
How to troubleshoot startup problems or power loss in Caravaggi CIPPO 25 Chipper?
If you're experiencing startup issues or power loss with your Caravaggi Chipper: * Consult the engine or tractor booklet for troubleshooting steps. * Evaluate the quality of the material being shredded.
What to do if the Caravaggi CIPPO 25 hopper rejects material?
If the hopper of your Caravaggi Chipper is rejecting material, you should: * Check the chipper blade for wear. * Ensure that the shredding chamber is free of any obstructions. * Verify the feed roller rotation.
Manufacturer's background and introduction to Caravaggi chippers.
Overview of Caravaggi chippers as efficient and reliable machines.
Advice on reading the manual for safe operation, adjustment, and use.
Disclaimer on liability and advice to contact the importer for assistance.
Key safety rules for operating the chipper, including protective gear and handling fuel.
Step-by-step guide for preparing and starting the diesel version of the chipper.
Instructions for connecting and preparing the tractor PTO version of the chipper.
Explanation and operation of the electronic no-stress device for feed roller control.
Guide to programming minimum and maximum thresholds for the HENGSTLER TICO 732.
Procedure for safely removing and replacing the chipper blade.
Steps for replacing the counter-blade on the chipper.
Guide to identifying and resolving common problems with the chipper machine.
Terms and conditions of the manufacturer's warranty for the chipper.
Exclusions from the warranty coverage, including misuse and lack of maintenance.
Steps to follow when making a warranty claim for a defective chipper.
General| Max. chipping diameter | 250 mm |
|---|---|
| Production | 25 m³/h |
| Number of blades | 2 |
| Chipping Capacity | 25 m³/h |
| Number of Knives | 2 |
| Engine power | 50 HP |
| Feed Opening | 250 x 250 mm |
To Next Page
