What to do if my Caravaggi Chipper won't start?
If your Caravaggi Chipper isn't starting, examine the belt tension and condition, PTO, and gears. Make sure the pulleys aren't jammed. Inspect the knives, blade, and counter-blade. Check for any material obstructing the shredding chamber. Finally, check the engine/motor, referring to its instruction manual.
Why does my Caravaggi Chipper lose revs and function irregularly?
If your Caravaggi Chipper loses revs and functions irregularly, check the belt tension and condition, PTO and gears. Make sure the pulleys aren't jammed. Inspect the knives, blade, and counter-blade. Check for any material obstructing the shredding chamber. Check the sieve for blockage. Also, check the engine/motor, referring to its instruction manual, and examine the material being chopped.
Why is my Caravaggi Chipper vibrating excessively?
Excessive vibration in your Caravaggi Chipper can be addressed by checking the knives, blade, and counter-blade. Also, check to see if there is any material in the shredding chamber.
What to do if my Caravaggi Chipper has a difficult start-up or loss of power?
If your Caravaggi Chipper experiences difficult start-ups or power loss, check the belt tension and condition, PTO, and gears. Ensure the pulleys aren't jammed. Also, check the engine/motor, referring to its instruction manual.
Why does the Caravaggi Chipper hopper reject material?
If the hopper of your Caravaggi Chipper is rejecting material, check the knives, blade, and counter-blade. Check for any material in the shredding chamber. Check the engine/motor, referring to its instruction manual. Also, check the wear of the hopper rubber protection.
Outlines general safety practices, checks before operation, and machine usage guidelines.
Details specific safety precautions for Petrol, Cardan-shaft, and Electric models.
Step-by-step instructions for removing and fitting new chipping blades.
Procedure for removing and replacing the counter-blades on the bio-shredder.
Instructions for removing, inverting, and replacing the cutting knives and spacers.
To Next Page
General
