Warning – Programming the advanced features of this operator must only be undertaken by fully
trained and qualified personnel. Please contact your dealer for details.
ADVANCED PROGRAMMING FEATURES:
• Set automatic closing
• Limit learned force
• Control external light relay
SET
AUTOMATIC CLOSING:
Warning – When using this feature a beam break kit must be connected and programmed in
accordance with Menu a in the basic settings.
MENU OVERVIEW:
a Set door open period
2 Set warning phase
3 Set start-up warning
4 Set door to close after driving through beam break
e Re-set level 3 menus
T
O SET UP AUTOMATIC CLOSING:
Menu a
S
ET DOOR OPEN PERIOD (AUTOMATIC TIMER)
Operator is in normal operating mode
1. Press %, & and / simultaneously for 10 seconds until LED D blinks
and all others are illuminated
2. Release % whereafter LED A blinks
3. Use & and / to change the door open period (time open)
minimum time: 5 seconds
maximum time: 255 seconds
4. Press % to store and go to Menu b
IQ
UW
ZE
TR
255
seconds
KQ
UW
ZE
TR
180
seconds
8Q
UW
ZE
TR
150
seconds
8Q
JW
ZE
TR
120
seconds
8Q
7W
ZE
TR
100
seconds
8Q
7W
HE
TR
80
seconds
8Q
7W
6E
TR
50
seconds
8Q
7W
6E
GR
40
seconds
8Q
7W
6E
5R
35
seconds
8Q
7W
6E
5F
30
seconds
8Q
7W
6E
54
25
seconds
8Q
7W
6D
54
20
seconds
8Q
7W
63
54
15
seconds
8Q
7S
63
54
10
seconds
8Q
72
63
54
5
seconds
8A
72
63
54
timer
dectivated
OPERATOR PROGRAMMING - ADVANCED SETTINGS
Page 16
To Next Page
