Why does Cardiac Science Medical Equipment Atria beep twice?
If your Cardiac Science Medical Equipment Atria beeps twice or makes abnormal beeping sounds, it means a function or key is not allowed, for example, you've reached the end of a list or field.
How to troubleshoot power issues with Cardiac Science Medical Equipment Atria?
If your Cardiac Science Medical Equipment Atria won't power up, here are a few things to check: * Ensure the Atria is properly connected to an external power source. * Verify that the battery is correctly installed and has sufficient charge. * Inspect the power cord for any faults. * Confirm that the AC outlet is functional. * Check the external power supply for any issues.
What to do if Cardiac Science Medical Equipment Atria display is blank?
If the Cardiac Science Medical Equipment Atria display is completely blank, try the following: * Press the [On/Stby] key to restart the device. If it doesn't respond, make sure it's plugged in and try pressing the [On/Stby] key again. * Check if the Atria is in maintenance mode (indicated by pressing the [On/Stby] key twice during power-on). If so, press the [On/Stby] key once to restart. * Adjust the display contrast using [Form Feed] to verify the Atria is on, and then press [Shift] + [Previous] to lighten the display or press [Shift] + [Next] to darken it.
General| Battery Type | Lithium-ion rechargeable battery |
|---|---|
| Display | LCD screen |
| Operating Temperature | 32°F to 122°F (0°C to 50°C) |
| Storage Temperature | -20°C to 60°C (-4°F to 140°F) |
| Humidity Range | 5% to 95% non-condensing |
To Next Page
