Page 12
CLEANING AND CARE
CLEANING THE EXTERIOR OF YOUR STEAM IRON
1. Turn the Temperature Control Dial to MIN, then disconnect the iron from the wall
outlet and let it cool down completely.
2. Deposits and other residues on the soleplate and can be removed with a cloth
soaked in a vinegar/water solution.
3. The casing may be wiped with a damp cloth and then polished with a dry one.
4. Never use any abrasives to clean the soleplate.
5. Keep the soleplate smooth; avoid contact with metal objects.
STORAGE
1. Turn the Temperature Control to “•” and set the Steam Control Switch to position
“0” (no steam).
2. Disconnect the iron from the wall outlet.
3. Pour any remaining water out of the water tank.
4. Stand the iron upright and let it cool down completely.
5. The power cord can then be wound around the iron.
6. Always store the iron in an upright position.
SAFETY PROTECTIVE
CUT-OUT
In the unlikely event of the thermostat failing, the protective cut-out will operate
to prevent the iron from overheating. Then the iron should be taken to the nearest
authorized service facility.
To Next Page
Loading...