Need help?Do you have a question about the CareFusion IVAC P6000 and is the answer not in the manual?
Safety warnings and precautions for using the syringe pump.
Step-by-step guide on how to properly load a syringe into the pump.
Procedure for powering on and starting an infusion with the pump.
Explanation of the Backoff feature for managing post-occlusion bolus.
List of technical access codes and their functions for pump configuration.
Details on setting up the pump in fully or semi-dedicated modes.
Guide to configuring pump settings like drug setup, clock, and hospital name.
Procedure for setting up drug names, concentrations, and protocols.
Configuration of various pump options including Backoff, alarms, and communication settings.
Instructions for calibrating pump sensors and mechanisms.
Guide to performing the pump's self-test routine for diagnostics.
Information on acquiring and performing software upgrades for the pumps.
Method for verifying pump linear accuracy using a dial indicator.
Procedure for testing the pump's beam and line occlusion.
Test procedure for line pressure measurement on P7000 models.
Guidelines for battery testing, charging, storage, and replacement.
Procedure for verifying overall pump performance after service.
List of error codes, their failures, and recommended actions or replacements.
Checklist for diagnosing common faults by examining pump components.
Diagram illustrating the functional modules and interconnections of the pump.
Detailed functional descriptions of the pump's main circuit boards and modules.
Procedure for removing and replacing the Control and Display PCBs.
Detailed steps for disassembling the pump's transmission assembly.
Safety warnings and precautions for using the syringe pump.
Step-by-step guide on how to properly load a syringe into the pump.
Procedure for powering on and starting an infusion with the pump.
Explanation of the Backoff feature for managing post-occlusion bolus.
List of technical access codes and their functions for pump configuration.
Details on setting up the pump in fully or semi-dedicated modes.
Guide to configuring pump settings like drug setup, clock, and hospital name.
Procedure for setting up drug names, concentrations, and protocols.
Configuration of various pump options including Backoff, alarms, and communication settings.
Instructions for calibrating pump sensors and mechanisms.
Guide to performing the pump's self-test routine for diagnostics.
Information on acquiring and performing software upgrades for the pumps.
Method for verifying pump linear accuracy using a dial indicator.
Procedure for testing the pump's beam and line occlusion.
Test procedure for line pressure measurement on P7000 models.
Guidelines for battery testing, charging, storage, and replacement.
Procedure for verifying overall pump performance after service.
List of error codes, their failures, and recommended actions or replacements.
Checklist for diagnosing common faults by examining pump components.
Diagram illustrating the functional modules and interconnections of the pump.
Detailed functional descriptions of the pump's main circuit boards and modules.
Procedure for removing and replacing the Control and Display PCBs.
Detailed steps for disassembling the pump's transmission assembly.
General| Display | LCD |
|---|---|
| Device Type | Infusion Pump |
| Manufacturer | CareFusion |
| Model | P6000 |
| Infusion Modes | Continuous |
| Flow Rate Range | 0.1 to 999.9 mL/hr |
| Flow Rate Accuracy | ±5% |
| Volume Range | 0.1 to 9999 mL |
| Alarm System | Audible and Visual |
| Alarms | Air-in-line, Occlusion, Low Battery |
| Battery Type | Rechargeable |
| Communication | RS-232 |
To Next Page