23
Servicing
There is no routine maintenance required for the MicroLab and there
are no user serviceable parts in this instrument. Please return the
unit to CareFusion or an authorised agent if servicing is required.
Troubleshooting
In the unlikely event that the display ‘freezes’ and the unit does not
respond to any key presses, hold the on/off button down for 10
seconds until the unit switches off and then turn on again.
Symbols
Type B device
0086
In accordance with Directive 93/42/EEC
Disposal in compliance with WEEE
Environment
This instrument complies with directive EN60601-1-2
electromagnetic compatibility but can be affected by cellular phones
and by electromagnetic interference exceeding levels specified in
EN 50082-1:1992
This instrument is not for use with flammable anaesthetic gases or in
an oxygen enriched atmosphere
To Next Page
Loading...
