Need help?Do you have a question about the CareFusion Alaris GW and is the answer not in the manual?
Guidelines for using infusion sets, including anti-siphon valves and set compatibility.
Covers earth conductor requirements, explosion, fire, and shock hazards.
Guides the user through the initial unpacking, connection, and battery charging process.
Step-by-step guide on how to correctly load an infusion set into the pump.
Instructions on how to prime the infusion set before starting an infusion.
Steps to start an infusion in standard mode, with optional VTBI/Time.
Steps to start an infusion in micro mode, with optional VTBI/Time.
Details on how to configure and use the secondary infusion mode.
How to adjust infusion rate and administer bolus doses.
How to adjust occlusion pressure limits and alarm volume levels.
Table listing alarm messages, their causes, and recommended actions.
Table outlining warning messages, causes, and user responses.
Recommended usage of the flow sensor based on pump mode and infusion set.
Guidelines for regular cleaning, inspection, and functional testing of the pump.
Details on electrical safety, EMC, dimensions, and environmental conditions.
Parameters related to bolus rate and volume administration.
Details on system accuracy, air sensor, and memory retention.
Describes pump self-tests and the air-in-line monitoring feature.
Details downstream/upstream occlusion detection and free flow protection.
General| Brand | CareFusion |
|---|---|
| Model | Alaris GW |
| Category | Medical Equipment |
| Language | English |
To Next Page