Need help?Do you have a question about the CareFusion Alaris CC and is the answer not in the manual?
Defines the pump's intended use by medical staff for controlling infusion rate and volume.
Outlines requirements for clinician competence and post-placement management of intravenous catheters.
Lists therapeutic areas for which the pump is indicated, including analgesics and chemotherapy.
Specifies therapies for which the pump is contraindicated, such as enteral therapies.
Emphasizes user familiarity with the pump and manual prior to use.
Provides step-by-step initial setup and operation instructions for basic pump functions.
Details precautions related to the correct selection and use of syringes and extension sets.
Provides guidance on how and where to safely mount the syringe pump unit.
Specifies suitable environments and conditions for pump operation, including restrictions.
Explains how alarms are indicated and the user's responsibility for checking the infusion.
Details potential hazards like explosion risk and electrical shock, and required safety measures.
Details the steps for initial pump setup, including checking contents and connecting power.
Explains how to select the desired language for the pump's interface messages.
Details the procedure for mounting the pump onto docking stations or equipment rails.
Explains the PURGE SYRINGE option and its usage before patient connection.
Explains the role and use of the pressure transducer and disc.
Details setting the infusion rate and performing the purge procedure.
Final steps to connect to the patient and start the infusion process.
Explains how to use the purge function to clear air from the infusion set.
Details the bolus infusion feature, including configuration and administration.
Describes the manual bolus delivery method and its limitations.
Explains how to check and adjust pressure levels with or without a pressure set.
Details how to enable/disable the rate lock feature and its implications.
Explains how to set the total volume to be infused and the rate at VTBI end.
Describes the procedure to clear the recorded volume infused.
Explains how to review the currently selected dosing information.
Allows setting a specific VTBI and delivery time, calculating the required rate.
Describes how to review the log of hourly volume infused.
Explains how to access and review the pump's event log.
How to display the currently selected drug name.
Describes the meaning of amber and red alarm indicator lights.
Lists and describes various general settings that can be configured on the pump.
Explains how to configure which syringes are permitted for use.
Covers setting the pump's display language, contrast, and enabled units.
Details the pump's electrical classification, safety standards, and EMC compliance.
Describes cleaning and inspection tasks performed at regular intervals or usage.
Explains how the pump operates on battery power and its maintenance requirements.
Gives guidance on the proper disposal of the pump and its components.
Defines the pump's intended use by medical staff for controlling infusion rate and volume.
Outlines requirements for clinician competence and post-placement management of intravenous catheters.
Lists therapeutic areas for which the pump is indicated, including analgesics and chemotherapy.
Specifies therapies for which the pump is contraindicated, such as enteral therapies.
Emphasizes user familiarity with the pump and manual prior to use.
Provides step-by-step initial setup and operation instructions for basic pump functions.
Details precautions related to the correct selection and use of syringes and extension sets.
Provides guidance on how and where to safely mount the syringe pump unit.
Specifies suitable environments and conditions for pump operation, including restrictions.
Explains how alarms are indicated and the user's responsibility for checking the infusion.
Details potential hazards like explosion risk and electrical shock, and required safety measures.
Details the steps for initial pump setup, including checking contents and connecting power.
Explains how to select the desired language for the pump's interface messages.
Details the procedure for mounting the pump onto docking stations or equipment rails.
Explains the PURGE SYRINGE option and its usage before patient connection.
Explains the role and use of the pressure transducer and disc.
Details setting the infusion rate and performing the purge procedure.
Final steps to connect to the patient and start the infusion process.
Explains how to use the purge function to clear air from the infusion set.
Details the bolus infusion feature, including configuration and administration.
Describes the manual bolus delivery method and its limitations.
Explains how to check and adjust pressure levels with or without a pressure set.
Details how to enable/disable the rate lock feature and its implications.
Explains how to set the total volume to be infused and the rate at VTBI end.
Describes the procedure to clear the recorded volume infused.
Explains how to review the currently selected dosing information.
Allows setting a specific VTBI and delivery time, calculating the required rate.
Describes how to review the log of hourly volume infused.
Explains how to access and review the pump's event log.
How to display the currently selected drug name.
Describes the meaning of amber and red alarm indicator lights.
Lists and describes various general settings that can be configured on the pump.
Explains how to configure which syringes are permitted for use.
Covers setting the pump's display language, contrast, and enabled units.
Details the pump's electrical classification, safety standards, and EMC compliance.
Describes cleaning and inspection tasks performed at regular intervals or usage.
Explains how the pump operates on battery power and its maintenance requirements.
Gives guidance on the proper disposal of the pump and its components.
General| Model | Alaris CC |
|---|---|
| Power Supply | 100-240 VAC, 50/60 Hz |
| Manufacturer | CareFusion |
| Infusion Modes | Continuous, Intermittent |
| Alarm System | Audible and visual alarms for occlusion, air-in-line, low battery |
| Connectivity | RS-232 |
| Flow Rate Range | 0.1 mL/h to 1200 mL/h |
| Volume to be Infused (VTBI) | 0.1 mL to 9999 mL |
| Occlusion Pressure Settings | Adjustable (low, medium, high) |
| Battery Type | Rechargeable Lithium-Ion battery |
| Operating Temperature | 40°C (104°F) |
| Dose Rate Calculation | Yes |
| Drug Library | Yes (customizable) |
| Weight-Based Dosing | Yes |
To Next Page