Carel easy way aria User Manual

29
GB
easy way ARIA +030220841 - rel. 1.0 - 26.10.2007
Editing the factory parameters
Use the procedure described in the previous paragraph to access
parameter loc10, and enter the password (default 22).
Fig. 4.f.c
The factory parameters (loc9, loc11 to loc21) can now be displayed and
set.
Changing the password
The password to access the FACTORY parameters is :
a 3-digit numeric value between 000 and 999.•
Default value = 22•
It can be changed:
By setting a parameter on the terminal (loc11)•
Access the parameters menu –
Enter the password for loc10 –
Set loc11 to the desired value. –
Fig. 4.f.d
Via supervisor•
Set the following parameter. –
par. description min max def um type index R/W notes
loc 11
Value of the password to access the factory parameters
0 no access password
n access password to be entered for loc 10
0 999 22 - I 23 R/W
password
access
Wait for the terminal to complete transmission to the access point –
(antenna symbol  ashing).
Nota: After the change has been set, the factory parameters can
only be accessed using the new password.

Carel easy way aria Specifications

General

Brand	Carel
Model	easy way aria
Category	Controller
Language	English