Need help?Do you have a question about the Carel easy way aria and is the answer not in the manual?
General| Number of analog inputs | Up to 2 |
|---|---|
| Display | LCD with backlight |
| Operating temperature | -10°C to +50°C |
| Storage temperature | -20°C to +60°C |
| Humidity | < 90% RH non-condensing |
| Serial communication | RS485 Modbus RTU |
| Analog input type | 0-10 V, 0-20 mA, NTC 10 kΩ |
Overview of the ARIA system, its components, and CAREL solution advantages.
Definitions, benefits of wireless, ZigBee advantages, and network types.
Illustrative examples of the easy way system in various building applications.
Instructions for mounting and connecting all system devices.
Example network, device addressing, and wireless channel selection.
Steps to connect and configure terminals and sensors to the network.
Logical connection process between access point and wireless devices.
Connecting repeaters and procedures to reset devices to factory defaults.
Explanation of wireless variables and terminal reset procedures.
Description of the terminal's display elements and keypad button functions.
Managing operating modes, heater status, and skipping modes.
Setting time bands, controlling ON/OFF, and mode examples.
Controlling time bands and symbols via the master supervisor.
Setting the clock, time format, and adjusting fresh air percentage.
Using UP/DOWN and Multifunction buttons for navigation and setting.
Customizing fields shown on the main and secondary displays.
Selecting temperature units and calibrating terminal sensors.
Setting set points and using the COMFORT function for ambient control.
Configuring keypad locks and occupancy detection for room status.
Using Sleep mode and understanding the temperature algorithm for requests.
Trends for cooling, heating, and automatic mode requests.
Informing the supervisor about humidification/dehumidification requests.
List of internal terminal alarms due to hardware malfunctions and sensor issues.
How alarms from the master-supervisor are displayed on the terminal.
How to access the parameter menu and edit user-configurable parameters.
Procedure to access factory parameters and manage the password.
Lists of supervisor variables for access points and terminals.
Lists of supervisor variables for sensors and repeaters.
Technical details and product codes for the terminal unit.
Technical details and product codes for the sensor unit.
Technical details and product codes for the access point.
Technical details and product codes for the repeater unit.
Key wireless features like distance, frequency, power, and device limits.
To Next Page
