To Next PageTo Next Page
Need help?Do you have a question about the Carel GDSRSHCC00 and is the answer not in the manual?
General| Type | Gas Detector |
|---|---|
| Model | GDSRSHCC00 |
| Manufacturer | Carel |
| Detection Gas | Refrigerant gases |
| Output | Relay |
| Operating Humidity | 0 to 95% RH (non-condensing) |
| Protection Rating | IP65 |
| Refrigerant compatibility | HFO |
Describes the intended uses and applications of the GLD Small series leakage detectors.
Covers general information and critical aspects for the proper installation of the gas detector.
Provides guidelines for installing detectors in equipment rooms and cold rooms, including placement advice.
Details how to configure the device parameters using the internal rotary switch and a voltmeter.
Introduces the RILEVA TE app for smartphone interaction, configuration, and maintenance.
Explains how to set up the Modbus RS485 communication parameters for the device.
Details the periodic calibration process, its necessity, and considerations for different sensor types.
Guides through the process of calibrating the device using the RILEVA TE mobile application.
Explains the steps for performing calibration using Modbus communication.
Provides instructions for sensor replacement for both built-in and remote versions.
