Need help?Do you have a question about the Carel GLD Series and is the answer not in the manual?
General| Brand | Carel |
|---|---|
| Model | GLD Series |
| Category | Gas Detectors |
| Language | English |
Information on the disposal of electrical and electronic equipment according to EU directives.
Details the intended applications for the gas leakage detector and its general use.
Describes the features and specifications of the built-in gas leakage detector model.
Details the features and specifications of the remote gas leakage detector model.
Guidance on factors affecting gas detector performance and installation compliance.
Provides guidelines for optimal placement of gas detectors in various environments.
Instructions for physically mounting the gas detector unit.
Covers wiring, power supply, and signal connections for the device.
Describes the device's initialization sequence and sensor warm-up phase.
Explains the device's configurable analogue output for gas concentration measurement.
Details the Modbus RTU interface for data communication and configuration.
Outlines the visual and audible indications of the detector's current status.
Steps for performing routine maintenance to ensure device accuracy and function.
Procedure for calibrating the sensitive element and performing bump tests.
Detailed manual and app-based steps for zero-point calibration.
Instructions for cleaning the detector using water and mild detergent.
Explains the hexadecimal format for viewing and decoding fault codes.
Details specific fault codes, their possible causes, and required actions.
Diagram and list of components involved in sensitive element replacement.
Step-by-step guide for safely replacing the sensitive element.
Details electrical parameters like voltage, current, and output signals.
Provides dimensions, weight, operating temperature, and enclosure rating.
Information on sensor types, maintenance intervals, and calibration requirements.
Lists Modbus connections, configuration settings, and variable registers.
Explains how semiconductor, infrared, and electrochemical sensors work.
Information on proper disposal of the device and its components.
Lists directives and standards the device complies with (EMC, LVD, RED, RoHS).
Table of part numbers for GLD series gas detectors by version, technology, and refrigerant.
Catalog of available sensitive elements, including technology, refrigerant, and max PPM.
Lists accessories available for the gas detectors, such as calibration kits.
To Next Page
