To Next PageTo Next Page
Need help?Do you have a question about the Carel GDSRSMXC00 and is the answer not in the manual?
General| Model | GDSRSMXC00 |
|---|---|
| Detection Gas | Refrigerant gases |
| Communication protocol | Modbus RTU |
| Protection Rating | IP65 |
| Detection Principle | Electrochemical |
| Power Supply | 12-24 VDC |
| Output Signal | 4-20 mA |
| Output | Relay |
| Operating Temperature | -20°C to 50°C |
| Operating Humidity | 0% to 95% RH (non-condensing) |
Guidelines for optimal sensor placement in various environments like equipment rooms and cold rooms.
Step-by-step instructions for mounting the device and making electrical connections.
Detailed guide on configuring device settings using the internal rotary switch.
Details on how alarms are activated, warning/alarm thresholds, and set points.
Guidelines and parameters for setting up and operating the device on a Modbus RS485 network.
Comprehensive list of Modbus registers for reading input and writing configuration.
Procedure for periodic calibration using a calibration kit, including sensor reset.
Step-by-step guide for performing calibration using the RILEVA TE mobile application.
Instructions for performing calibration using Modbus communication and register operations.
Detailed steps for replacing the sensor in both built-in and remote versions.
