Need help?Do you have a question about the Carel PAD and is the answer not in the manual?
General| Operating system | Linux |
|---|---|
| Screen size | 7 inches |
| Resolution | 800 x 480 pixels |
| Touch technology | Resistive |
| Processor | Cortex A8 |
| Connectivity | Ethernet, RS-485, USB |
| Power supply | 24 VDC |
| Operating temperature | 0…+50 °C |
| Protection rating | IP65 |
Information for users on the correct handling of Waste Electrical and Electronic Equipment (WEEE).
Overview of the pAD wall-mounted LCD room terminal and its design suitability.
Details the key functions of the pAD, including configuration, sensor reading, and mode control.
Lists the different pAD models available, specifying features like sensor types and buzzer.
Explains the display indications and symbols on the pAD terminal.
Illustrates fundamental operations performed by the pAD buttons in standard configuration.
Describes alternative functions of the pAD buttons, such as setting differentials or time bands.
Provides detailed steps for assembling and installing the pAD device, including power disconnection.
Details the correct power supply connections, including voltage, current, and safety warnings.
Explains the pAD's RS485 serial interface for communication with controllers.
Lists environmental conditions to avoid during pAD installation to prevent damage.
Explains how to turn the pAD device ON, put it in STANDBY, and manage time bands.
Details how to activate cooling operation in the zone controlled by the pAD terminal.
Details how to activate heating operation in the zone controlled by the pAD terminal.
To Next Page
