Carel PAD - 1. Introduction to the pAD Terminal; 1.1 Presentation of the pAD; 1.2 Main Functions of the pAD; 1.3 pAD Models

pAD +030220873 - rel. 1.2 18.01.2013
23
1. INTRODUCTION
1.1 Presentation of the pAD
pAD is the wall-mounted LCD room terminal with icon-based display
for use with pCO controllers. It is available in two models: with
temperature sensor or temperature + humidity sensors.
Depending on the model, pAD can be connected to the pLAN port or
Field Bus RS485 port. The clock, available on some models for
managing time bands, and the attractive design, make the display
suitable for residential or commercial applications.
1.2 Main functions of the pAD
Functions of the pAD include:
- configuration and display of the temperature and
humidity set point
- reading of temperature and/or humidity sensors
- time band management
- manual and automatic heating / cooling mode
changeover
- manual and automatic fan speed setting (3 speed)
- clock setting / display
- display of alarms from the pCO controller connected
to the pAD
- management of “sleep mode”
- display of icons (COOLING, HEATING…)
- synchronisation of the clock on the pCO controller
with the clock on the pAD
1.3 pAD models
Code Description
ADPB003000 pAD NTC, buzzer
ADPB003010 pAD NTC, backup RTC, buzzer
ADPC003000 pAD NTC, backlight, buzzer
ADPC003010 pAD NTC, backup RTC, backlight, buzzer
ADPG003000 pAD NTC, humidity sensor, buzzer
ADPG003010
pAD NTC, humidity sensor, backup RTC,
buzzer
ADPH003000 pAD NTC, humidity sensor, backlight, buzzer
ADPH003010
pAD NTC, humidity sensor, backup RTC,
backlight, buzzer