4
“Power+” +0500048IE - rel 2.2 - 06.11.2014
ENG
The Power+ drives are compliant with:
• Low voltage directive 2006/95/EC;
• Electromagnetic compatibility directive 2004/108/EC.
and have been designed and built in compliance with standard:
• EN 61800-5-1.
Note:
This instruction sheet is provided for the purpose of describing the operations for commissioning and installing
the drive, as well as illustrating the main features of the product. For further information, see the user manual code
+0300048EN, downloadable, including prior to purchase, from www.carel.com, under “Literature”.
NO POWER
& SIGNAL
CABLES
TOGETHER
READ CAREFULLY IN THE TEXT!
WARNINGS: Separate as much as possible the probe and digital input signal cables from
the cables carrying inductive loads and power cables to avoid possible electromagnetic
disturbance. Never run power cables (including the electrical panel wiring) and signal
cables in the same conduits.
SYMBOLS
Dangerous voltage
Caution, hot surface
Important: brings critical subjects regarding use of the product to the user’s attention
Note: when attention must be given to subjects of relevant importance, in particular regarding
practical use of the various product functionalities.
To Next Page
Loading...
Need help?
General
