Need help?Do you have a question about the Carestream Quantum Odyssey HF QG-80 and is the answer not in the manual?
Provides essential safety guidelines for operating medical electrical equipment safely.
Explains the meaning and use of safety symbols and text notations within the manual.
Details federal regulations and performance standards the device complies with.
Details electromagnetic emissions and immunity guidance for safe operation.
Presents detailed technical specifications for single-phase, non-stored energy models.
Details the nominal voltage, current, and output power capabilities of various models.
Describes the operator controls, indicators, and their functions on the control panel.
Details the steps for safely powering the generator on and off for short or long periods.
Describes the three operational modes: Manual, AEC, and Anatomical Programmed Regions (APR).
Details how to manually set X-ray techniques and exposure factors for each exposure.
Explains how the system automatically sets mAs/time for proper optical density using AEC.
Describes how X-ray techniques are automatically set based on anatomical programs and patient size.
Explains how to interpret and respond to system fault messages and indications.
Guides users through adding, modifying, or deleting names for APR regions and views.
Provides instructions for customizing exposure factors for specific APR procedures.
General| Generator Power | 80 kW |
|---|---|
| Dynamic Range | 16-bit |
| Spatial Resolution | 3.6 lp/mm |
| Control System | Touchscreen |
| X-Ray Tube Focal Spot | 0.6 / 1.2 mm |
| Detector Size | 17 x 17 inches |
| Pixel Pitch | 139 μm |
| Operating Temperature | 10°C to 35°C (50°F to 95°F) |
| Humidity Range | 30% to 75% (non-condensing) |
| Type | Digital Radiography System |
| Storage Temperature | -20° to 55°C (-4° to 131°F) |
To Next Page