What to do if Carestream Medical Equipment Operator Console reports a blocking error?
If the Operator Console powers up successfully but reports a blocking error, power down the system and then power it up again. If the blocking error continues to occur, it is recommended to contact your authorized Service Provider.
How to troubleshoot Carestream Medical Equipment that does not start up?
To troubleshoot a system that doesn't start, begin by checking the battery level indicators. Also, ensure that all applicable switches on the system are turned on. If the problem continues, it is recommended to contact your authorized Service Provider.
What to do if I cannot log on to Carestream Medical Equipment?
If you cannot log on to the Carestream Medical Equipment, ensure you're using the correct login and password, noting that passwords are case-sensitive. If issues persist, consult with your System Administrator or Key Operator. If the problem continues, it is recommended to contact your authorized Service Provider.
What to do if Carestream Medical Equipment application does not start?
If the Operator Console powers up successfully, but the application does not start, power down the system and power it up again. If the problem continues, it is recommended to contact your authorized Service Provider.
What to do if Carestream Medical Equipment is unable to set parameters?
If you are unable to set parameters due to a failed communications link on your Carestream Medical Equipment, power down the system and then power it up again. If the problem continues, it is recommended to contact your authorized Service Provider.
What to do if Carestream Medical Equipment batteries fail to charge?
If batteries fail to charge in your Carestream Medical Equipment, power down the system and power it up again. If the problem persists, it is recommended to contact your authorized Service Provider.
What to do if Carestream Medical Equipment tasks in the Startup screen does not start?
If, during startup, one of the tasks in the Startup screen does not start, power down the system and power it up again. If the failure occurs again, it is recommended to contact your authorized Service Provider.
Stresses reading precautions and observing warnings for safe operation.
Explains how the system operates on rechargeable batteries.
Describes the low-profile arm and transport system for maneuverability.
Outlines the process and time for charging the main battery bank.
Lists components of the user interface like monitor and scanners.
Explains diagnostic screens and service history logging.
Details the specifications of the system's PC controller.
Lists the compatible detectors for the system.
Explains how to move and position the cart using its brakes.
Describes the structure and function of the arm assembly.
Details X-ray tube technology, voltage, and exposure timing.
Explains the cool-down periods between X-ray exposures.
Provides detailed descriptions of various system components.
Details the functions and display of the touchscreen.
Provides specifications for the X-ray tube, including focal spots.
Provides instructions on how to safely drive the system cart.
Explains the procedure for docking and deploying the arm.
Explains the functionality of the system's power button.
Outlines general maintenance requirements and responsibilities.
Information on battery replacement schedule and procedure.
Broad safety guidelines and warnings for system use.
Lists specifications for the cart, including weight and speed.
Details movement and holding forces for the tube head assembly.
Troubleshooting steps for system startup issues.
Contact information for technical support and service.
General| Display | 19-inch touchscreen |
|---|---|
| Type | Mobile X-ray System |
| Generator Power | 32 kW |
| Tube Focal Spot | 0.6/1.2 mm |
| Dynamic Range | 14 bits |
| Battery Life | Up to 8 hours |
| Detector Size | 35 cm x 43 cm (14 in x 17 in) |
| Battery | Rechargeable lithium-ion |
| Mobility | Motorized |
| Connectivity | Wireless |
| kV Range | 40 to 150 kV |
| mA Range | 10 to 400 mA |
| Pixel Pitch | 139 µm |
| Compatibility | DICOM compliant |
| Environmental Conditions | Operating Temperature: 10°C to 35°C (50°F to 95°F); Humidity: 30% to 75% non-condensing |
| Detector Type | Wireless |
To Next Page
