Need help?Do you have a question about the Carestream Quantum Odyssey HF QG-50-2 and is the answer not in the manual?
General safety guidelines and precautions for operating the X-ray generator.
Explanation of safety icons and how warnings, cautions, and notes are used in the manual.
Details the technical performance specifications for single-phase generators.
Provides data on the generator's electrical output parameters and loading factors.
Step-by-step instructions for powering the generator on and off.
Procedure for daily X-ray tube warm-up and seasoning to maintain performance.
Steps required to prepare the system before taking an exposure.
Explains the different operational modes: Manual, AEC, and APR.
Procedures for initiating and completing an X-ray exposure.
Steps to access the APR Edit mode through the Service Mode, requiring password entry.
Procedures for modifying programmed exposure factors for specific APR views.
Steps to enter the Service Mode for system settings and APR Edit utility access.
General| Generator Power | 50 kW |
|---|---|
| kV Range | 40 - 150 kV |
| Dynamic Range | 16-bit |
| Portability | Mobile |
| Exposure Time | 1 ms to 10 s |
| Detector Type | Flat Panel Detector (FPD) |
| Pixel Pitch | 139 μm |
| Image Matrix | 3072 x 3072 |
To Next Page