Need help?Do you have a question about the Carestream DRX-1 and is the answer not in the manual?
Details classification for Carestream DRX-1 System Detector and DRX 2530 Detector.
Lists applicable product safety standards for USA, Canada, EU, and international markets.
Outlines EMC requirements and tests, including CISPR 11 and IEC 60601-1-2.
Provides precautions for EMC, communications equipment, cables, and other equipment.
States compliance with FCC rules for Class A digital devices and potential interference.
Guides the user on the intended electromagnetic environment for emissions and immunity.
Advises on minimum separation distances for RF communication equipment to prevent interference.
Declares compliance with RF exposure limits (SAR) and Industry Canada regulations.
Lists key features of the DRX detectors, including portability and wireless operation.
Highlights critical safety warnings for detector operation and handling.
Provides visual guides (figures) of DRX-1, DRX-1C, and DRX 2530C detectors.
Step-by-step instructions for inserting a battery into the detector.
Details the procedure for unlatching and removing the detector battery.
Guides on correctly positioning DRX-1 and DRX-1C detectors in a Bucky.
Explains best practices for identifying and using single or multiple detectors in different rooms.
Describes available tether interfaces and their usage, including safety cautions.
Instructions on how to connect the detector tether to the system.
Details the process of applying identification labels to detectors for clear room-based management.
Explains the meaning of various LED patterns and recommended user actions.
Information on product disposal requirements in the European Union.
Specifies environmental conditions for transporting and storing the detector.
Specifies environmental conditions for operating the detector.
Covers general maintenance, cleaning procedures, and precautions for the detector.
Step-by-step guide for cleaning the detector using isopropyl alcohol.
Instructions for cleaning the battery compartment well and prongs.
Procedures for cleaning patient contact areas after use.
Details shipping labels and weight limit restrictions to prevent detector damage.
Lists revisions and dates for the user guide.
General| Spatial Resolution | 3.6 lp/mm |
|---|---|
| A/D Conversion | 16-bit |
| Scintillator | Cesium Iodide (CsI) |
| Active Area | 35 cm x 43 cm |
| Pixel Pitch | 139 µm |
| Image Processing | Automatic Exposure Detection |
To Next Page