Carestream DRX-1 - Equipment Maintenance; Procedure to clean the detector

Detector Operation
2–16 AA5348 | 2012-12-20
Equipment Maintenance
Cautions
Caution
• Do not operate the equipment when cleaning the equipment.
• Do not immerse the equipment in liquid.
• Do not spray cleaning solution directly onto the equipment.
Caution
Isopropyl alcohol is a flammable solvent. Read and follow instructions in the Material Safety Data
Sheet (MSDS).
Procedure to clean the detector
Prerequisites:
• 70 % Isopropyl alcohol solution
• Clean, soft cloth
1. Disconnect the detector from its power source.
a. Remove the tether.
b. Remove the battery.
2. Moisten a cloth with a 70 % isopropyl alcohol solution.
3. Apply the moistened cloth to the equipment.
Postrequisites:
Make sure the detector is dry before using it.