What to do if Carestream Medical Equipment Operator Console reports a blocking error?
If the Operator Console powers up successfully but reports a blocking error, power down the system and then power it up again. If the blocking error continues to occur, it is recommended to contact your authorized Service Provider.
How to troubleshoot Carestream Medical Equipment that does not start up?
To troubleshoot a system that doesn't start, begin by checking the battery level indicators. Also, ensure that all applicable switches on the system are turned on. If the problem continues, it is recommended to contact your authorized Service Provider.
What to do if I cannot log on to Carestream Medical Equipment?
If you cannot log on to the Carestream Medical Equipment, ensure you're using the correct login and password, noting that passwords are case-sensitive. If issues persist, consult with your System Administrator or Key Operator. If the problem continues, it is recommended to contact your authorized Service Provider.
What to do if Carestream Medical Equipment application does not start?
If the Operator Console powers up successfully, but the application does not start, power down the system and power it up again. If the problem continues, it is recommended to contact your authorized Service Provider.
What to do if Carestream Medical Equipment is unable to set parameters?
If you are unable to set parameters due to a failed communications link on your Carestream Medical Equipment, power down the system and then power it up again. If the problem continues, it is recommended to contact your authorized Service Provider.
General| Display | 19-inch touchscreen |
|---|---|
| Type | Mobile X-ray System |
| Generator Power | 32 kW |
| Tube Focal Spot | 0.6/1.2 mm |
| Dynamic Range | 14 bits |
| Battery Life | Up to 8 hours |
| Detector Size | 35 cm x 43 cm (14 in x 17 in) |
| Battery | Rechargeable lithium-ion |
| Mobility | Motorized |
| Connectivity | Wireless |
| kV Range | 40 to 150 kV |
| mA Range | 10 to 400 mA |
| Pixel Pitch | 139 µm |
| Compatibility | DICOM compliant |
| Environmental Conditions | Operating Temperature: 10°C to 35°C (50°F to 95°F); Humidity: 30% to 75% non-condensing |
| Detector Type | Wireless |
To Next Page
