Carlisle Binks E2-15 - Page 25

EN
PARTS LIST
-
Shaft & Bellows Assembly
Screw Item No. 2 (assembly spigot) onto
the piston shaft (grease spigot with
AMGD-010).
Using Item No. 7, push bellows over
spigot until located in groove.
Smear loctite 572 over nose of bellows,
thread nut onto bellows ensuring the
thread starts squarely. Grip bellows
lightly by hand and tighten the nut with a
1" A/F spanner until the nut contacts the
bellows shoulder.
KEY
(Reverse for assembly)
LOCTITE
TORQUE
MAINTENANCE ORDER
GREASE INTERNAL
(AGMD-010)
GREASE
77-3311 R1.0 25/36 www.carlisleft.com