Carlisle Binks E2-15 - Hose and Airflow Requirements; Gearbox Venting

EN





e.g.,
INSTALLATION
Attach suitable flexible hoses to the inlet and outlet connections.
Ensure adequate air space around the Pump for maintenance and electric motor cooling requirements.
Check that the oil plug on top of Gearbox has been replaced with the correct venting plug or it's travel pin
has been removed.
Suction - Ø28 I.D. [-1 to 10 bar working pressure]
Outlet - Ø25 I.D. [20 bar working pressure]
77-3311 R1.0 8/36 www.carlisleft.com