EN
www.carlisleft.com 77-3345 R1.1 (06/2022)
13 / 62
2.5 Cylinder assembly:
The main part of this assembly is the cylinder block (1) which has three pneumatic cylinders that operate
the material valves. In each of the cylinders, a piston (2) is fixed to the valve needle. On top of the cylinder
block is a cylinder cover (3) fitted that includes springs (4) that close the material valves. The cylinders are
actuated by 24 V monostable 3/2 port solenoid valves.
1
4
3
2
To Next Page
Loading...
