18” CHIPPER MACHINE SPECIFICATIONS
4
General:
Weight: ----------------11700 Pounds
Length:-----------------240 inches
Height: -----------------108 inches
Tires: -------------------235/75R17.5 Ld Rng H 6005 #
@ 125 PSI
Axle: -------------------Two Dexter Torflex
9000-Pound Cap
Brakes: -----------------Electric Both Axles
w/Breakaway Switch
Hitch:-------------------9” Height Adjustable Pintle
Fuel Capacity:---------62 Gallons
Battery:-----------------950 CCA
Jack Stand: ------------10000 # Cap Screw Type
Engine:
(Varies depending on selection of engine make & model)
Manufacturer: ---------John Deere 6068T Turbo Diesel
Number of Cylinders: Six
Bore: -------------------4.19 Inches (106 mm)
Stroke: -----------------5 Inches (127 mm)
Displacement: ---------414 Cubic Inches (6.8L)
Maximum RPM:------2500 RPM
Horsepower:-----------170 HP
Torque:-----------------358 Ft Lbs (485 NM)
Cooling Medium:-----Liquid Water/Antifreeze Mixture
Air Cleaner: -----------Two Stage Dry Type
Oil Filter: --------------Full Flow Spin On
Oil Capacity: ----------13 Quarts
Oil Type:---------------John Deere
Electrical: --------------12 Volt
Gauges: ----------------Murphy Power View
w/Shutdowns
Clutch: -----------------Twin Disk 11 1/2” Dual Plate
Bearings:
Disk Bearings: --------2 15/16 inch Tapered Roller
Feed Roller Bearings: 2 7/16 inch Tapered Roller
Disk Shaft:-------------5 inches
Feed Roller Shaft: ----2 7/16 inches
Chipper Disk:
Wheel Diameter:------55 inches
Wheel Thickness:-----2 inches with 1 inch backer
Disk Balance: ---------Precision High Speed Balanced
Wheel Speed: ---------900-RPM Nominal
Number of Knives: ---6
Knife Dimensions: ---(4) 7 1/4” x 4 1/2” x1/2” (2) 5 1/8”
Anvil: ------------------5” x 18”x 3/4 ” AR400
Chip Throwers: -------Two 1/2”x 4” x 8” x 24 1/2” long
Cutting Dimensions:
Throat Opening: ------18 1/2” x 20 1/2”
Hydraulic System:
Hyd Pump Displcmnt: -.2.59 in cu/rev total from 2 pumps
Hyd Pump Drv Systm: -Direct Drive off Engine Mount
Flow: ---------------------25 GPM Total Tandem Systems
System Relief:-----------3000 PSI
Oil Tank Capacity: -----20 Gallons
Oil Type:-----------------AW32
Valve: --------------------Solenoid Operated DO5 Valves
Hose: ---------------------16,000 PSI Burst - Exceeds SAE
100R2
Oil Filter: ----------------10-Micron Return with Suction
Strainer
Hydraulic Cooler:-------Aluminum with Electric Fan
Drive System:
Engine Sheave:----------6/5V7.5
Jackshaft Sheave: -------6/5V21.2
Drive Belt: ---------------6/5V1320
Cutter Head Shaft: ------5”
Feed System:
Feed Motors: ------------64 Cubic Inch Displacement
Flow: ---------------------Separate Systems for Top/Btm Feed
Hydraulic Drive: --------Live – Driven off engine
Autofeed: ----------------Reversing, Digital, Fully Adjustable
Feed Rate: ---------------100 Feet Per Minute
Feed Rollers: ------------Top- 15 3/4” Dia
Btm- 10 5/8” Dia
Springs: ------------------Two 19” Tight Wound Powder
Coated
Slide Bearings: ----------Four 16” x 1” x 1” Ryertex
Lift Cylinders:-----------Two 2 x 18 with 1” attachments
Discharge: ---------------Hyd Adjustable Swivel Crank
Height
Frame:
Main Trailer Tongue: --3” x 8” with 1/2” wall
Main Trailer Frame: ----3” x 8” with 1/4” wall
Telescoping Tongue: ---N/A
Engine Channel Mnts: -4 channel with 5/16” web
Infeed Chute: ------------1/4” with 2” x 2” x 1/4” tube frame
Infeed Tray: -------------3/8” Plate w/2”x2” & 2”x4” Tube
Folding Tray Lock: -----N/A
Discharge Chute: -------1/4” neck with 10-gauge discharge
Discharge Lock: --------N/A
Fuel Tank: ---------------10 gauge with baffles; rubber mtd
Hydraulic Tank:---------10 gauge with baffles; rubber mtd
Battery Box: -------------14 gauge checker plate - lockable
Fenders: ------------------3/16” checker plate
Feeder Bar: --------------1 1/2” OD x 1/8” wall - removable
Radiator Guards:--------2” x 4” with 3/16” wall
Light Brackets:----------3/16” w/ hidden wiring LED Lights
Axle Mounts:------------1/2” Plate
Hitch Plate: --------------3/4” Plate adjustable 9” Up/Down
To Next Page
Loading...
