Remove the banknote from the back drawer
and/or remove dust from Left Back IR sensor.
Remove the banknote from the back drawer
and/or remove dust from Right Back IR sensor.
Please Clean Left Counting Sensor!
Remove the banknote from the machine and/or
remove dust from IR sensor.
Please Clean Right Counting Sensor!
Remove the banknote from the machine and/or
remove dust from IR sensor.
MG# 1 Failure
MG#2 Failure
MG#3 Failure
Re-plug the left magnetic board.
MG#4 Failure
MG#5 Failure
Re-plug the MRS magnetic board.
MG#6 Failure
MG#7 Failure
MG#8 Failure
Re-plug the right magnetic board.
MID-MG Failure
MID-MT Failure
Re-plug the middle magnetic board.
4. Detection error messages and solutions:
If one of the following error messages is displayed on the LCD during the counting/sorting,
refer to the list below:
Remove the banknote from the machine and/or remove dust from
UV or FL sensor.
MG-Error
MG1-Error
MG2-Error
MG3-Error
Remove the banknote from the machine and/or remove dust from
MG sensor.
Please contact your technician/dealer to adjust the counting IR.
Remove the banknotes and restart the machine.