3. Panel
1] ：Currency selection.
2] ：Batch function on/off and set batch number.
3] ：Increase the batch number by 1 (short press) or 10 (press and hold).
4] ：Send count report to print.
5] ：Counting mode settings: MIX, SINGLE, FACE, ORIENT, COUNT.
6] ：ADD function on/off. Also serves as an upward navigation key.
7] ：View the counting result report. Also serves as a downward navigation key.
8] ：Enter/exit device menu and go back to previous screen (in MENU mode).
9] ：Clear the number of counted banknotes and turn the batch function off.
10] ：Start counting/ Confirm selection in menu mode.
To Next Page
Loading...