Carrier TRANSICOLD Vector 8500 Operator's Manual

62-11646 14
S WITCHING O PERATING S TATE - C ONTINUED
ELECTRIC TO ENGINE
1. Press and release the MENU key until the STANDBY soft key is displayed.
2. Press the STANDBY soft key, the STANDBY and DIESEL soft keys will
display.
WARNING
!
Under no circumstances should ether or any other starting
aids be used to start the engine.
3. Press the DIESEL soft key to place the unit in Engine Operation. The unit
will stop, the status bar will change to DIESEL and the unit will restart in
Engine Operation.
4. If the standby electric cable is in place, and will not be needed, ensure the
external power circuit breaker is OFF, disconnect the cable from the unit
receptacle and hang up off the ground.
START/STOP ELECTRIC
BOX TEMPERATURE
o
FSETPOINT
o
F
LANGUAGE
DATA
RECORDER
34.3
34
STANDBY
1
START/STOP DIESEL
BOX TEMPERATURE
o
F SETPOINT
o
F
STANDBY
DIESEL
34.3
34
EXIT
2

Carrier TRANSICOLD Vector 8500 Specifications

General

Brand	Carrier TRANSICOLD
Model	Vector 8500
Category	Automobile Accessories
Language	English