Carrier TRANSICOLD Vector 8500 Operator's Manual

62-11646 26
D ATA R ECORDER / T RIP S TART
The Data Recorder records data while the START/RUN - OFF switch is in the
START/RUN position.
1. With the system powered up (START/RUN-OFF switch in the START/RUN
position) press the MENU key until DATA RECORDER is displayed.
2. Press the DATA RECORDER soft key to display the sub menus.
3. The Data Recorder screen will display with a 15 second timeout. Press the
▲ or ▼ key to scroll through the available sub menus. With the desired
sub-menu highlighted, press the “=” key to enter the menu.
MARK TRIP START
Trip Start places the present time and date as a stamp in the data recorder
memory to allow easy review of the data from the last trip, and to allow
downloading data from a specific trip. A trip begins at a Trip Start and ends at
the next Trip Start.
1
2
START/STOP DIESEL COOL
Viewing Menu Soft Key
LANGUAGE
DATA
EXIT
Selections
Press Menu Key to Scroll
RECORDER
DATA RECORDER (1 of 5)
MARK TRIP START
BACK
EXIT
PRINT TO SCREEN
PRINT TO PRINTER
SCREEN SETUP
PRINTER SETUP
Choices vary based
and model type.
on software revision

Carrier TRANSICOLD Vector 8500 Specifications

General

Brand	Carrier TRANSICOLD
Model	Vector 8500
Category	Automobile Accessories
Language	English