Carrier TRANSICOLD Vector 8500 Operator's Manual

62-11646 20
P RETRIP
Pretrip is a set of tests run by the system to check unit operation. It is
recommended that a Pretrip is run prior to loading the refrigerated
compartment. It will indicate a failure if one is detected.
1. With the system powered up (START/RUN-OFF switch in the START/RUN
position) press the MENU key until PRETRIP is displayed.
2. Press the PRETRIP soft key to display the PRETRIP MENU screen; which
will display with a 15 second timeout.
3. Use the ▲ or ▼ key to select START PRETRIP, then press the “=” key.
1
2
START/STOP DIESEL COOL
Viewing Menu Soft Key
INTELLISET
PRETRIP
HOUR
METERS
UNIT
DATA
Selections
Press Menu Key to Scroll
PRETRIP MENU
START PRETRIP
VIEW RESULTS OF LAST PRETRIP
BACK
EXIT

Carrier TRANSICOLD Vector 8500 Specifications

General

Brand	Carrier TRANSICOLD
Model	Vector 8500
Category	Automobile Accessories
Language	English