Input Service Configurations
The following configurations require the LID screen to be in the Service portion of the menu.
• password
• input time and date
• LID configuration
• controller identification
• service parameters
• equipment configuration
• automated control test
Password
When accessing the Service tables, a password must be entered. All LIDs are initially set for
a password of 1-1-1-1. This password may be changed in the LID configuration screen, if
desired.
Input Time and Date
Access the Time and Date table on the Service menu. Input the present time of day, date,
and day of the week. ‘‘Holiday Today’’ should only be configured to ‘‘Yes’’ if the present day is a
holiday.
To Next Page
Loading...
