Water Leaks
Water is indicated during machine operation by the refrigerant moisture indicator (Figure 2)
on the refrigerant motor cooling line. Water leaks should be repaired immediately.
Water Treatment
Untreated or improperly treated water may result in corrosion, scaling, erosion, or algae. The
services of a qualified water treatment specialist should be obtained to develop and monitor a
treatment program.
CAUTION
CAUTION
!
Hard scale may require chemical treatment for its prevention or removal. Consult
a water treatment specialist for proper treatment.
CAUTION
CAUTION
!
Machine must be dehydrated after repair of water leaks. See
Machine Dehydration
section.
To Next Page
Loading...
