Contents
Table 8 — LID Primary and Secondary Messages and Custom Alarm/
Alert Messages with Troubleshooting Guides (Continued)
H. Normal Run with Reset, Temperature, Or Demand
I. Normal Run Overrides Active (Alerts)
J. Out-of-Range Sensor Failures
K. Machine Protect Limit Faults
L. Machine Alerts
M. Spare Sensor Alert Messages
N. Other Problems/Malfunctions
Table 9A — Thermistor Temperature (F) vs Resistance/Voltage Drop
Table 9B — Thermistor Temperature (C) vs Resistance/Voltage Drop
Table 10 — 17/19EX Heat Exchanger, Economizer/Storage Vessel,
Piping, and Pumpout Unit Weights
Table 11 — Additional Condenser Weights
Table 12 — Compressor/Motor/Suction Elbow Weights
Table 13 — Additional Cooler Weights
To Next Page
Loading...
