pressure and outputs the difference as an oil differential pressure signal to the PSIO. The PSIO
converts this signal to differential oil pressure. To calibrate this reading, refer to the
Troubleshooting Guide, Checking Pressure Transducers section.
Click here for Figure 7 — 17EX Controls and Sensor Locations
Click here for Figure 8 — 19EX Controls and Sensor Locations
Click here for Figure 9 — Control Center (Front View); Shown with Options Module
Click here for Figure 10 — Control Sensors (Temperature)
Click here for Figure 11 — Control Sensors (Pressure Transducer, Typical)
Click here for Figure 12 — Power Panel Without Options (Open-Drive Machine
Shown)
To Next Page
Loading...
