To View or Change Point Status (
Figure 18
)
Point Status is the actual value of all of the temperatures, pressures, relays, and actuators
sensed and controlled by the PIC.
1.
On the Menu screen, press STATUS to view the list of Point Status tables.
2.
Press NEXT or PREVIOUS to highlight the desired status table. The list of tables is:
• Status01 — Status of control points and sensors
• Status02 — Status of relays and contacts
• Status03 — Status of both optional 8-input modules and sensors
STATUS SCHEDULE SETPOINT SERVICE
NEXT PREVIOUS SELECT ENTER
Click here for Figure 16 — 17/19EX Menu Structure
To Next Page
Loading...
