Override Indication
An override value is indicated by ‘‘SUPVSR,’’ ‘‘SERVC,’’ or ‘‘BEST’’ flashing next to the point
value on the Status table.
To View or Change Time Schedule Operation (
Figure 19
)
1. On the Menu screen, press SCHEDULE .
2. Press NEXT or PREVIOUS to highlight one of the following schedules.
OCCPC01S — LOCAL Time Schedule
OCCPC02S — ICE BUILD Time Schedule
OCCPC03-99S — CCN Time Schedule (Actual number is defined in Config table.)
STATUS SCHEDULE SETPOINT SERVICE
NEXT PREVIOUS SELECT EXIT
To Next Page
Loading...
