Install Spring Isolation
Spring isolation may be purchased as an accessory from Carrier for field installation. It may
also be field supplied and installed. Spring isolators may be placed directly under machine
support plates or located under machine soleplates. See Figure 13. Consult job data for specific
arrangement. Low profile spring isolation assemblies can be field supplied to keep the machine
at a convenient working height (Figure 14).
Obtain specific details on spring mounting and machine weight distribution from job data.
Also, check job data for methods to support and isolate pipes that are attached to spring
isolated machines.
Click here for Figure 10 — 19XL Machine Footprint
Click here for Figure 11 — Standard Isolation
Click here for Figure 12 — Accessory Isolation
To Next Page
Loading...
