46
Super Enviro-Shield
anti-corrosion protection
263 Extremely durable and exible epoxy polymer coating applied to
micro-channel heat exchangers via an electro-coating process, with
a nal UV protective topcoat. Minimal variation in heat transfer, tested
to withstand more than 6000 hours of constant neutral salt spray as
per ASTM B117, superior impact resistance as per ASTM D2794
Improved corrosion resistance, recommended for use in extremely
corrosive environments
30RBM/30RBP
160-520
Welded evaporator water
connection kit
266 Victaulic piping connections with welded joints Easy installation 30RBM/30RBP
160-520
230 V electric plug 284 230 VAC power supply source provided with plug socket and
transformer (180 VA, 0.8 A)
Enables connection of a laptop or an electrical device during unit
start-up or servicing
30RBM/30RBP
160-520
Expansion tank 293 6-bar expansion tank integrated into the hydronic module (option 116
required)
Easy, quick installation (ready to use), and closed circuit protection of
hydraulic systems to counter excessive pressure
30RBM/30RBP
160-520
Screwed water connection
sleeve kit for DSH
303 DSH connections with screw connection sleeves Easy to install. Used to connect the unit to a screw connector 30RBM/30RBP
160-520
Welded water connection sleeve
kit for DSH
304 DSH inlet/outlet welded connection sleeves Easy installation 30RBM/30RBP
160-520
Set point adjustment by 4-20mA
signal
311 Connections to allow a 4-20mA signal input Easy energy managment, allow to adjust set point by a 4-20mA
external signal
30RBM/30RBP
160-520
Free-cooling mode drycooler
management
313 Control and connections to a free-cooling drycooler 09PE or 09VE
tted with optional FC control box
Easy system management, control capabilities extended to a
drycooler used in free cooling mode
30RBM/30RBP
160-520
To Next Page
Loading...
