48
Dimensions, clearances
1
1500
Power connection
2410 HT
904 338
1500
2253 HT
904 338 1500
22001500
1500
2253 HT
519208
42
2
1
1
1
2
1
1
1
2
2’’ Victaulic
2297 HT
2200
1500
All dimensions are in mm.
1
Clearances required for maintenance and air ow
2
Clearance recommended for coil removal
Water inlet
Water outlet
Control box
NOTE: Non-contractual drawings.
When designing a system, refer to the certied dimensional drawings
provided with the unit or available on request.
For the location of xing points, weight distribution and coordinates of
the centre of gravity, refer to the certied dimensional drawings.
To Next Page
Loading...
