Carrier 30RBM 330 - Dimensions and Clearances (cont.); Dimensions for 430-520 Models (with;without Hydronic)

50

2297 HT
4797 HT
2730
2200
339
1500
1500
1500
2253 HT
519208
40
1500 2730 339
1500
1500
2353 HT
2200


1
2
1
1
1
1
2
1
1
1
2’’ Victaulic
NOTE: For units with other options, refer to the certied dimensional drawings.

All dimensions are in mm.
1
Clearances required for maintenance and air ow
2
Clearance recommended for coil removal
Water inlet
Water outlet
Control box
NOTE: Non-contractual drawings.
When designing a system, refer to the certied dimensional
drawings provided with the unit or available on request.
For the location of xing points, weight distribution and
coordinates of the centre of gravity, refer to the certied
dimensional drawings.