Selecting the Heat or Cool Mode 2-Pipe Operation
9
Cool Only
Step #6 = 2 in the Advanced Setup section, page 19.
Cooling Only
The COOL setting indicates the temperature
that the room has to rise to before the cooling
source will turn on to cool the room.
Time Schedule for Heating or Cooling
Program On will activate the stored timer
operation for the heating and cooling
setpoints (occupied or unoccupied periods).
OFF
OFF indicates both heating and cooling
are turned o.
Press
MODE
Press
MODE
Fan
Fan
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
