Carrier 33CSSP3-FC - Programming Occupied & Unoccupied Periods; Setting Occupied Periods and Setpoints; Setting Unoccupied Periods and Setpoints

Programming Occupied & Unoccupied Periods
13
Press the MODE button. While holding MODE, press
the UP button for two seconds to enter time period
programming.
MODE
Select the maximum # of occupied
periods to be used on any one day.
Typically, most installations use
only Occupied 1. (1,2 or 3)
Adjust the cooling setpoint for
Occupied 1. (35˚ - 99˚, OF )
Adjust the heating setpoint for
Occupied 1. (OF, 35˚ - 99˚)
Adjust the cooling setpoint for
unoccupied periods. (35˚ - 99˚, OF )
Press
MODE
Press
MODE
Press
MODE
Press
MODE
Continued
Downloaded from ManualsNet.com search engine