Carrier 33CSSP3-FC - Fan, Deadband, and Backlight Settings

Advanced Setup
20
Adjust the deadband
for the 1st stage
(1˚- 6˚)
See page 25
Adjust the minimum dierence
betweencooling&heatingsetpoints.
(0˚ - 6˚)
Step #9 will not appear if step #6 = 1 or 2.
Select backlight operation:
On - Light continuously
O - Light for 8 seconds
after a button press
On
O
On
O
Select operation when
fan is in the Auto mode:
On = continuous low speed fan
O = only energize during
a heating or cooling cycle.
See Page 28, Note #2
Setup
Setup
Setup
OFF
OFF
AUTO
COOL
HEAT
Setup
MODE
Press
MODE
Press
MODE
Press
MODE
Press
Continued
Downloaded from ManualsNet.com search engine