About Advanced Features & Operation
27
FACTORY DEFAULTS - If, for any reason, you desire to return all the stored
settings back to the factory default settings, follow the instructions below.
WARNING: This will reset all Time Period and Advanced Programming
to the default settings. Any information entered prior to this reset
will be permanently lost.
1 Place the thermostat in the OFF mode.
2 Press and hold the MODE button. While
holding the MODE button, press and hold
the DOWN button for 5 seconds. All icons
will appear on the display.
3 After all of the icons appear, release the
MODE and DOWN buttons. Then press and
hold the FAN button for 5 seconds.
4 After the letters Fd appear on the display
(Factory Default), release the FAN button.
Press the MODE button twice to return to
normal operation.
MODE
FAN
MODE
MODE
OFF
OUTSIDE
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
